|
 |
||
|
|
 |
 |
|
HYDRAULIC
SHUTTLE TRAY CUTTING MACHINES
The machine is suitable for cutting sheet or rolled materials, including textiles, paper, leather, artificial leather and plastic in one or more lays within the limits of maximum permissible cutting force. The machine is composed of a closed, welded frame, a bridge construction, a hydraulic supply unit as well as the elements of control mechanism. |
|
|
ADVANTAGES
|
|
The electrical control elements as a closed unit are located in a box which is mounted on the front side of the machine. It provides a ready access during installation and service. The material to be cut is spread over the cutting board through guide and support rollers fitted over the table which can be moved forwards and backwards during operation. |
|
|
SPECIFICATION
|
C 2120 | C 2125 |
| Cutting pressure |
22 U.S. Tons
|
27.5 U.S. Tons
|
| Max. cutting stroke |
4.7"
|
4.7"
|
| Min. cutting stroke over the knife |
0.3"
|
0.3"
|
| Max. daylight (without cutting board) |
6.5"
|
6.5"
|
| Max. number of strokes at 2.4" stroke length (double stroke) |
40 / min.
|
40 / min.
|
| Width of head |
48.8"
|
68.5"
|
| Depth of head |
15.75"
|
15.75"
|
| Table size |
39.4" x 33"
|
67" x 33"
|
| Pump motor power |
3 Hp
|
3 Hp
|
| Mains voltage |
220v/440v/60Hz
|
220v/440v/60Hz
|
| Revolution |
1440 r.p.m.
|
1440 r.p.m.
|
| Control voltage |
12 V, 24 V
|
12 V, 24 V
|
| Control box protection |
IP 31
|
IP 31
|
| Weight |
3260 Lb
|
4180 Lb
|
| |
|
   |