Go To Home Page
Since 1948
Swingarm Cutting 106.8
C106.8
Swingarm Controls
Operation table of
type C 106.8		 Swingarm Cutting G008XL
G008XL


HYDRAULIC SWING ARM CUTTING MACHINES
This group of cutting machines is suitable to cut various sheet materials, leather, synthetic leather, textile, cardboard, rubber, soft plastics etc. with single or double edged cutting knives in one or multiple layers.
 

If brochure does not open, you need the free Adobe reader.

ADVANTAGES
  • Due to their construction, the machines are quiet and can be operated safely.
  • The power transmission of the machine is electrohydraulic.
  • The machines are operated by two hands.
  • Safety devices are used in conformity with the usual requirements of safety regulations.
  • The model C 106.8 is provided with an advanced stroke adjustment feature and two overcut buttons.
  • On the models G 008XL and G 016XL stroke length setting is electronic while stroke position is set mechanically
Type
 Cutting Table Arm Width Cutting Force Stroke Daylight Electric Supply Voltage Motor Power Net Weight Packed Size Packed Weight
G 008XL 13.8"x 27.6" 13.8" 8.8 Tons 0.2"-2" 5.2" 3x220v/440v/60hz 1 Hp 750 Lbs 34"x34"x67" 925 Lbs
G 016XL 18"x 36" 17.7" 17.6 Tons 0.2"-2" 5.7" 3x220v/440v/60hz 1.5 Hp 1200 Lbs 43"x45"x67" 1450 Lbs
C 106.8 20" x 40" 21.7" 27.5 Tons 0.2"-4" 6" 3x220v/440v/60hz 2 Hp 2100 Lbs 43"x50"x67" 2415 Lbs
Specifications are subject to change without notice.